LockwoodSTEM • ADM Unit 4
Dimensional Inspection Report
Record target dimensions, tolerance limits, measurements, error, and acceptance status.
Name/Team: ____________________
Date: ____________
Revision: ________
Date: ____________
Revision: ________
Part Identification
| Part Name | Drawing Revision | Program Revision | Inspector | Date |
|---|---|---|---|---|
Critical Dimension Inspection
| Feature | Target | Lower Limit | Upper Limit | Measured | Error | Tool | Pass/Fail |
|---|---|---|---|---|---|---|---|
Visual and Surface Inspection
| Check | Requirement | Result | Notes |
|---|---|---|---|
Interface Fit Test
| Interface / Clearance | Requirement | Result | Pass/Fail |
|---|---|---|---|